Trending Now

How To Flash Stock Rom on lenovo Vibe K5 PLUS [UNBRICK][LENOVO]

How To Flash Stock Rom on lenovo Vibe K5 PLUS

The following drivers are needed for this task:

1. Lenovo USB Drivers.
2. QDLoader QFIL Drivers

Search for them on google and you will find them very easily. Most of the time they are there in the stock rom zip folder under a folder named Drivers.

Install all of them.

1. Download the Stock ROM you need for your phone from here:
DOWNLOAD STOCK FIRMWARE 

2. Extract the above zip to a folder. You will get three folders: Drivers, Images and Tools.

3. From the Drivers folder, Install all drivers.

4. From the Tools folder, install the QPST Tool. In your Start Menu it will come as QFIL. Don't worry about that.

5. Power Off your device.

6. Open QFIL TOOL.

7. Now On top you will see two options: 1. Flat Build 2. Meta Build

Select FLAT BUILD


8. In "PROGRAMMER PATH" click Browse and go to the folder named Images and select the one file it displays (something like prog_emmc....mbn).


9. Now click "Load XML" and select "rawprogram0.xml" file and then another dialog box will open. Here select "patch0.xml".


PC WORK IS DONE. DO NOT CLICK DOWNLOAD.

Your device should be switched off.

NOTE CAREFULLY: Hold "VOLUME UP + VOLUME DOWN" key (Do not press POWER button). and connect the USB Cable from PC to the phone.

Your phone should now display RED LED LIGHT and the QFIL Tool should now change from NO PORT to QUALCOMM.....Something like that.


You are now ready. Click on Download button on QFIL TOOL and then wait for atleast 15 minutes.

After the dialog at bottom shows "DOWNLOAD SUCCESSFUL" in blue color, UNPLUG your device. Wait for a few seconds or a minute and then POWER ON your device. 

First boot takes about 8-10 minutes. 

Hope You like It share it and comment 

IMPORTANT : First of all you should always have all the drivers installed on your PC.

READ EVERYTHING CAREFULLY AND MAKE SURE YOU HAVE FOLLOWED THE STEPS CAREFULLY AND THEN POST QUERIES.

1 comments :

Write comments